Weight Systems Inc. logo
Weight Systems Inc. - Commercial and Industrial Weighing Systems
Bulkweighing Scale Systems | Railcar-"Loadout" Bulkweighing Scale Systems | Bulkweighing Scale Controllers | Liquid Filler Scale Systems | Floor Scales | Non-Contact Level Measurements

SALES

SERVICE

INSTALLATION

WEIGHT SYSTEMS INC.

P.O. Box 1386
Laplace, Louisiana 70069

Jay Roberts - Leplace, Louisiana

jay@weightsystemsinc.com

504-782-9157
Mobile

985-652-2663
Phone & Fax

 

Al Hunter

409-665-8050
Mobile

409-243-2781
Office & Fax

 

LIQUID FILLER SCALE SYSTEMS

Drum Filler

drum fillerCommon Features
(Except where noted, all fillers have these advantages.)

  • Electronic models incorporate a "state of the art" GSE 662 programmable weight controller
  • Electronic models use continuous self diagnostics for monitoring all aspects of the filling operation
  • Auto tare feature zero's out the scale (fill is determined by net weight) regardless of drum weight
  • Dribble-Max-Dribble fill: At the start of the fill the valve opens to the dribble position, and after a predetermined weight, the valve opens to Maximum flow. Then, when a predetermined weight is reached, the valve returns to the dribble position prior to a smooth final cut off.
  • The lance lift/lower assembly utilizes a simple V track with rollers that is designed to operate indefinitely. A unique braking system on this assembly prevents the lance from retracting when the pneumatic piston is stopped in mid-stroke. On electronic models the lance position is determined by an encoder.
  • Anti-collision feature: Returns lance to home position if the lance is not lined up with the bung hole
  • For electronic subsurface models the lance rises during the fill and only as the weight increases. The lance position is maintained by weight and position encoding
  • Set points and lance position memory recall: The system remembers the different lance position settings, set points, valve dribble position, and many other settings when recalled by product ID numbers - Can store over 1,000 set-ups by product ID numbers (Electronic models only)
  • If the operator stops because of some mid-fill interruption, the fill can be resumed at a later time without interfering with the auto tare sequence (Electronic fillers only)
  • Quick release detachable lance
  • Operator selected automatic or manual mode
  • Operator selected dribble flow rate
  • Up to 100 psi product line pressure
  • Two inch inlet and valving assures minimum pressure gradient (drum fillers)
  • Electronic models feature an adjustable fume hood for handling 5 gal to 55 gal drums (Fixed hood on the 55000PS)
  • Operator selected sub-surface filling (bottom-up, for foamy or vaporous liquids) or top filling (for viscous material and faster fill cycle)
  • Fully adaptable to existing automated lines
  • All wetted parts are stainless steel and Teflon (for options, see Options and Accessories)
  • Fill determined by weight with tolerances to .01% of full scale capacity
  • Heavy duty construction for long lasting service

Extended warranty on parts

drum fillerOptions & Accessories

  • Electronic/digital or pneumatic control
  • Digital or analog readout
  • Type X Purge package for explosive products under electronic control
  • Wetted parts of stainless steel, Teflon, PVC, Kynar or Hastelloy C-22
  • Remote pump control (Start-stop or VFD)
  • Heavy duty roller conveyor
  • Stainless steel (corrosive products) or mild steel super structure
  • Epoxy powder coating, polyethylene powder coating (corrosives) or polyurethane coating (solvents)

Lid clamping device for clamping plastic lids on 1 qt. to 7 gal container

 

Bulkweighing Scale Systems | Railcar-"Loadout" Bulkweighing Scale Systems | Bulkweighing Scale Controllers
| Liquid Filler Scale Systems | Floor Scales | Non-Contact Level Measurements

WEIGHT SYSTEMS INC. | P.O. BOX 1386 LAPLACE, LOUISIANA 70069 | 985-652-2663